Well Pump Battery Backup for 240V Pumps

PVBAT TIGER · U.S. based support

Will TIGER power your well pump?

Backup for your water supply starts with a pump check: voltage, running load and starting demand.

Starting at $4,799
$5,999
20% off
20% off + stack extras
24kWh LiFePO4120/240V split phase 16.5kVA inverter13kW continuous output

48-state standard shipping included. Required delivery extras at actual carrier cost; tax confirmed before payment.

PVBAT TIGER mobile battery backup system

Compact TIGER specification card

Battery24kWh LiFePO4
AC output16.5kVA inverter · 13kW continuous active output · 120V / 240V split-phase
UseSelected essential loads
ReviewOptional to start; verified before purchase

Compatibility depends on pump voltage, running current, startup surge/LRA, connection method and simultaneous loads. Start with the pump information you have. We confirm nameplate and startup requirements before you buy.

Is TIGER a fit for your application?

120V / 240V well pumps; rural water systems; farm water supply; essential household loads during outages.

Compatibility depends on pump voltage and startup surge. You can request a free review without a photo. Missing technical details can follow before final suitability is confirmed.

Original TIGER equipment and connection-panel view
Real equipment detail. Pump voltage, running load and starting demand still require review.

Simple connection path

Grid, solar or generator charging PVBAT TIGER and compatible equipment

Direct loads require voltage, current and startup checks. Building, panel, transfer-equipment, solar-array or generator-circuit connections require a qualified electrician.

Why customers start with TIGER

High-capacity backup. 24kWh for longer-duration critical-load planning.

120/240V flexibility. Designed for selected split-phase equipment after review.

Practical next step. Send equipment data before a quote or configuration recommendation.

Send your equipment for review


Can a home battery backup run a 240V well pump?

Yes, if the system provides 120/240V split-phase output and the inverter can cover the pump’s running watts and startup surge. Battery size in kWh does not create 240V or starting headroom by itself. TIGER-T4 is one example class: 24 kWh LiFePO4, 16.5 kVA inverter, 13 kW continuous, and 120/240V split-phase. Compatibility still depends on the pump nameplate—voltage, running load, and startup/LRA. PVBAT can review that before you buy. Permanent panel or transfer work requires a licensed electrician. PVBAT does not provide installation services.

How long will a 24kWh battery run a well pump?

Estimated usable energy is about 18.4 kWh, using 80% depth of discharge and conversion efficiency of 96% or higher (24 × 0.80 × 0.96 ≈ 18.4 kWh). At a steady 1,000 W load, that is about 18.4 hours of pump-on time; at 1,500 W, about 12.3 hours. Real wells usually run in short bursts, so calendar time can be longer if other heavy loads stay off. Startup surge, duty cycle, temperature, and simultaneous household loads all change the result. These estimates do not include solar charging.

What size battery and inverter do I need for a well pump?

You need two checks: energy (kWh) for how long the pump can run, and power (kW / kVA) for what it can start and run. A 24 kWh class with about 18.4 kWh usable is a planning starting point for intermittent well use plus essentials. The inverter must also clear running watts and startup surge; TIGER-T4’s 13 kW continuous / 16.5 kVA rating is the review baseline, not a promise for every pump. Send the nameplate for a free review.

See TIGER-T4, what a 24kWh battery backup can run, Well pump startup surge and inverter sizing, What actually matters for 240V well pump backup, and 120/240V split-phase battery backup checklist.

Common questions

Can TIGER run a 240V well pump?
Yes, if the pump’s voltage, running watts, and startup surge fit the inverter. TIGER-T4 provides 120/240V split-phase output, 16.5 kVA, and 13 kW continuous. Capacity in kWh alone is not enough. Start with the nameplate you have; PVBAT can review compatibility before you buy.

What information do you need?
The pump model, voltage, running and start information, and a clear nameplate photo when available. A photo is helpful but optional at first; missing technical details can be reviewed during follow-up.

Can it connect to my panel?
Panel or transfer-equipment connections require a licensed electrician. PVBAT provides product options and installation guidance, not installation services.

How long will my pump run?
Estimated usable energy is about 18.4 kWh (24 × 0.80 × 0.96). At a steady 1,000 W load, that is about 18.4 hours of pump-on time; at 1,500 W, about 12.3 hours. Real runtime depends on duty cycle, startup, temperature, and other connected loads. Solar charging is not included.

Ready to check your equipment?

Send the model and nameplate information you have. PVBAT will review the next step with you.